Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket CAN bus immobiliser. It is discreet and does not have LED indicators or key fobs, and is hidden within the wiring of your vehicle.
It also allows users to temporarily disable the system through Transport Mode for when they are renting their vehicle. This guide will guide you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning and relay attacks. The system is linked directly to the ECU of your car and protected by a pin code you set. It is inaccessible to thieves using diagnostic scanners or other modern methods, and is not able to be disabled by cutting circuits.
The system is easy to use, however professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. Installers who are approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also suggest a tracking or alarm system to complete the protection package for your vehicle.
To avoid an accidental deployment of airbags or short circuits, the installer must first remove your battery. After the battery has been disconnected, the installer may start working safely. Basic hand tools are useful for securing connections with precision, while a multimeter can be used to check electrical values and ensure safety. Insulation tape and cable ties are also necessary for securing connections and keeping wiring neat. The user's manual offers specific instructions specifically tailored to your Ghost Immobiliser model.
It is crucial to select the right grounding spot that is free of paint or debris during installation. The installer must ensure that the immobiliser's H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. The wires can be plugged in or soldered depending on the model. To ensure a secure and long-lasting connection, it is recommended that you choose a high-quality plug.
Once the install is complete After the installation is complete, the customer can turn on the Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. To accomplish this, the customer must press the service button on the dashboard 5 times within 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a great choice for those who rent out their vehicles often through platforms like Turo. Immobilisers can also lower insurance costs, as it greatly reduces the chance of theft.
Getting Started
If you're looking for a solution that will secure your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser. It prevents your car from running even if someone steals or copies your key. It is possible because of its advanced technology that prevents the engine from starting until the right PIN code is entered.
The device works by connecting to the CAN bus network in your vehicle which allows it to communicate with the ECU directly. It uses the buttons on your steering wheel and dashboard to create a unique sequence, which only you are aware of. This makes it impossible for anyone else to start your car. This is the best way to protect your pride and joy. It will keep its value intact if you ever want to sell it.
Installing a Ghost immobiliser is easy however, you must follow the steps to avoid electrical problems and malfunctions in the system. You must first locate a power supply of 12V and a suitable grounding for the car's chassis. After that, you can begin to connect the wires that will be used to activate the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a strong connection. Also, make sure to cover the connections by using heat shrink tubing or insulation tape to shield them from electrical short circuits and other problems.
After the wires have been connected, you can connect the battery and then turn on the engine to test the function of the immobiliser. After you've verified that everything is functioning properly and you are satisfied, you can place the immobiliser in a safe place inside the vehicle. Be sure to conceal it in a secure manner so that a thief cannot alter it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it's a top-quality deterrent to car thieves. It is a superior defense against key cloning, hacking and relay attacks, and it cannot be disabled without knowing the code. The device is also simple to use and is able to be put into a service valet mode so that your vehicle isn't activated if you take it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It connects directly to the vehicle's CAN bus and communicates with the ECU, making it a virtually undetectable addition to your vehicle. Contrary to other aftermarket systems which require the removal of circuit components, the Ghost Immobiliser doesn't interfere with the factory settings for your vehicle.
It's also completely undetectable to thieves using diagnostic scanners. The system doesn't send or receive radio frequency signals, but instead uses CAN data to communication with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.
Enter your sequence for disarming (either two or one button) and then switch on the ignition of your vehicle to activate Ghost Immobiliser. The indicator will flash two times to confirm that you have entered the correct code. After this, you can start your car and drive away safely.
Once installed The Ghost Immobiliser can protect your car from key cloning and hacking, while protecting the value of your car's pride and joy. If you have to surrender your vehicle for service or valet parking The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll have to identify the source of power that is constant (12V) and a grounding point. Ensure that these are both well-insulated and safe to touch. It is also recommended to use cable tie to secure and bundle the wires. This reduces the risk of theft by thieves. To avoid committing mistakes, make sure to double-check these points and mark them using labels or tape. It's also a good idea to inspect all connections for signs wear and tear. Be sure to ensure that all connections are in place, and properly insulated. Don't forget to test the Ghost Immobiliser after the installation is complete. This will make sure that the unit is operating properly and that all connections and insulation are safe. If there are any issues, you must be sure to resolve them immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your vehicle's ECU to stop unauthorized motor starting. Its innovative technology safeguards your vehicle against key cloning and hacking along with other common methods employed by thieves to steal cars. The Ghost is a perfect complement to existing alarm and tracking systems to provide the most effective security for your car. This system's unmatched features and subtle design make it a popular option for car enthusiasts and security-conscious drivers too.
It is important to follow the steps of installation to ensure correct integration of the Ghost Immobiliser. A good starting point is to look over the vehicle's wiring diagram that serves as a guideline for locating and connecting the required wires. After that, you'll need identify the power source as well as grounding points. Once you've found them, you will have to mark them so that they are easily identifiable when installing. It's important to use high-quality materials and tools. Basic hand tools will aid in making precise connections. A multimeter will check electrical values, and also ensure safety. Insulation tape and cable ties will keep the connections tidy and neat. Also, a user's guide will provide specific instructions tailored to your Ghost model.
It is essential to test the system prior installing it. Enter the PIN code into the system, and then start the vehicle. ghost immobiliser cost will confirm the immobiliser is working as it should and prevent unauthorised vehicle starts. This step should be done regularly as part your regular vehicle inspections in order to ensure the system is working properly.
Once the installation is complete, you can drive your car with confidence. The Ghost will guard your pride and joy from thieves who might steal your car. It will ensure that no one can take your car away without having the correct PIN code. The Ghost can be paired with an approved Thatcham tracker that identifies any attempts at theft or tampering. This will allow you to track your car in the event that it's stolen.
The Ghost can be used on a wide range of vehicles and is compatible with all major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to learn more about our service and installation options. We are a TASSA Registered installer which guarantees that we adhere to strict guidelines and procedures when installing our products. This assures customers, insurance companies and law enforcement agencies that installations are done safely and in a correct manner.